How to Build An Anvil Stand
This anvil stand is constructed of 1-1/4″ steel schedule 80 pipe. Each leg is set at an 8 degree angle for stability. The feet of each stand leg has 3/8″ X 3″ circles welded to it. Leg length to suit the working height of the anvil.
The top frame is made of 1/4″ X 2″ X 3″ angle. The center support frame can be constructed of 1/4″ X 2″ flat bar.
Build to suit the size of your anvil. Inserted under the anvil is a plate cut to fit the inside dimensions of the angle frame.
This anvil stabilizer/hold down is constructed as shown from materials found around the shop that will serve the purpose.
Author: Ralph Sproul
